Metra Electronics Cell Phone 99 7609G User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7609G  
INSTALLATION INSTRUCTIONS FOR PART 99-7609G  
APPLICATIONS  
INFINITI I30 2000-2001  
INFINITI I35 2002-2004  
99-7609G  
KIT FEATURES  
• DIN Head Unit Provision w/ Pocket  
• ISO DIN Head Unit Provision w/ Pocket  
• DDIN Head Unit Provision  
• ISO Stacked Head Unit Provision  
• Painted Gray to Match Factory Color & Finish  
KIT COMPONENTS  
• A) Radio Housing • B) Radio Housing Brackets • C) ISO Brackets • D) ISO Trim Plate  
• E) DDIN Brackets • F) DDIN Trim Plate • G) Snap-In Pocket • H) (4) PPH38 Screws  
B
C
D
A
E
F
WIRING & ANTENNA CONNECTIONS  
G
H
(Sold Separately)  
WIRE HARNESS:  
• 70-7551 1995-up Nissan Amp Integration Harness  
ANTENNA ADAPTER:  
• 40-NI10 Nissan to Aftermarket Radio Antenna Adapter  
TOOLS REQUIRED  
• Phillips Screwdriver • Panel Removal Tool • Socket Wrench  
METRA. THE WORLD’S BEST KITS.™  
METRA. THE WORLD’S BEST KITS.™  
1-800-221-0932  
metraonline.com  
1-800-221-0932  
metraonline.com  
 
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION  
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION  
99-7609G  
99-7609G DASH DISASSEMBLY  
Infiniti I30 2000-01 / I35 2002-04  
Infiniti I30 2000-01 / I35 2002-04  
ISO DIN HEAD UNIT PROVISION  
1
Disconnect the negative battery  
terminal to prevent an accidental  
short circuit.  
A
B
C
1
Mount the ISO Brackets to the head  
unit with the screws supplied with  
the unit. (Fig. A)  
A
B
C
Unclip and remove the a/c vents  
above the radio. (Fig. A)  
2
3
4
Snap the pocket into the bottom  
opening of the radio housing.  
(Fig. B)  
2
3
Unclip and remove the shifter panel  
surrounding the shifter. (Fig. B)  
Slide the head unit into the radio  
opening until the side clips engage.  
(Fig. B)  
Remove (4) Phillips screws securing  
the radio/climate control/ashtray  
assembly. (Fig. C)  
4
5
Snap the Trim plate into the Radio  
Housing. (Fig. C)  
Remove (8) Phillips screws securing  
the climate control and ashtray to  
the assembly. (Fig. D)  
5
Locate the factory wiring harness  
and antenna plug in the dash.  
Metra recommends using the proper  
mating adapters from Metra and/or  
AXXESS.  
Reassemble dash in reverse order  
of disassembly.  
6
D
Continue to Kit Preparation  
4
1
 
99-7609G KIT PREPARATION  
99-7609G KIT ASSEMBLY  
Infiniti I30 2000-01 / I35 2002-04  
Infiniti I30 2000-01 / I35 2002-04  
DIN HEAD UNIT PROVISION  
1
Attach the radio housing brackets to  
the radio housing using the supplied  
(4) Phillips screws. (Fig. A)  
1
Slide the DIN cage into the Radio  
Housing and secure by bending the  
metal locking tabs down. (Fig. A)  
A
A
2
3
Secure the climate control to the  
radio housing bracket assembly  
using the factory hardware. (Fig. B)  
Snap the pocket into the bottom  
opening of the radio housing.  
(Fig. B)  
2
Attach the ashtray to the radio  
housing bracket assembly using the  
Slide the aftermarket head unit into  
the cage and secure. (Fig. C)  
3
factory hardware. (Fig. B)  
B
B
4
Locate the factory wiring harness  
and antenna plug in the dash.  
Metra recommends using the proper  
mating adapters from Metra and/or  
AXXESS.  
5
Reassemble dash in reverse order  
of disassembly.  
C
Continue to Kit Assembly  
2
3
 

Kustom Music Mixer KPM8420 User Manual
Land Pride Lawn Mower DRG04 User Manual
Lasko Electric Heater 5397 User Manual
Leica Microscope Magnifier DM4000B User Manual
Link electronic Stereo Amplifier DigiFlex 1152 User Manual
Maximatic Food Saver EFD 1010 User Manual
McIntosh DVD Player MVP861 User Manual
McIntosh Stereo Amplifier MCC302M User Manual
Melissa Laptop 635 072 User Manual
Memorex Clock Radio MC7101 User Manual